Technical ServiceSearch Result:

Solutions of how to solve Mercedes W205 C220 front parking sensors not working

There are lots of Eeprom programmer can read Motorola
here are few:
UPA USB
VVDI Prog
Xprog
SMOK
CPT
and many more.

Confirmed: BMW Mini Cooper remote programming can be done by Yanhua Mini ACDP programmer.

If it is CAS3, ACDP can do via OBD, if it is CAS3+, ACDP can do only after dismantling the CAS3+ and program new key using interface board.

Here obdexpress.co.uk shares the guide on how to use Autel IM608 to program new Semi-smart keys for Volvo XC60.

OBDSTAR DP plus is the good solution of Renault ESpace /Megane / Scenic / Talisman key programming. Here comes the help instructions.

Confirmed: ktm bench running pcmflash 1.99 is able to read and write Bosch ME17.4.4 via Bench.

Confirmed: Yanhua Mini ACDP is allowed to bound in more than one mobile Phone, not only one phone. But only in one mobile phone at the same time, if you want to bound another one mobile phone, this former one needs to be unbound.

Chevrolet Malibu XL 2018 with BCM No. 13514637 and module chip 24C32. Used CG100 programmer to read and write mileage successfully. This post share the whole procedure with lots images.

Confirmed!Auro IM600 or Autel Maxiim IM608 Can clear Audi A3 error code via OBD, with one-key clear, Only takes 2 minutes

What should you know before you buy Autel MaxiIM IM608?

Here is the mini post of how to use Autel MaxiSYS Elite to diagnostic GM

Look at the chart: what's the difference between VCM IDS 3 (SP277) and Chinese VCM 2 knock-off (SP177)? and which better for Ford or Mazda diagnosis and programming?

Yanhua Mini ACDP BMW CAS1 CAS2 CAS3 CAS3+ CAS4 CAS4+, FEM /BDC, BDC2 Coverage (from 2000 to 2019). Mini ACDP has odometer correction and key programming capabilities.

Have Chrysler before 2007 to match VIN on donor ecm and flashing too. DRB 3 machine is top choice but very expensive, any other Chrysler interface is ok? What about DRB3 emulator vci pod clone? Go on reading.

To read Freescale MC68HC908GR16(0M76Z) can be easily done by using any of Xprog 5.84, Xprog 5.74,Xprog 5.70 etc.