Flash Sale EU Ship No Tax [Second-hand 99% New] Xhorse VVDI BIMTool Pro Key Programmer for BMW

This device is second-hand, but it is almost new and can be used normally, saving you more money!

VVDI BIMTool Pro is the update version of VVDI BMW Tool, with enhanced edition for BMW, and it is an essential tool for automotive maintainers.

What is new feature of VVDI BIM TOOL PRO?

1. Add Inthernet port, support 10/100M programming via the Inthernet.
So it's Greatly speed up the F/G Classis Programming (connected via the network cable) and coding
2. OBD key learn: support CAS1/ CAS2/ CAS3/ CAS3+/ CAS3+ISTAP/ CAS4/ CAS4+ version.
3. File key making : support CAS1/ CAS2/ CAS3/ CAS3+/ ISTAP/ CAS4/ CAS4+,etc.
As for CAS1/ CAS2/ CAS3/ CAS3+ system, support reading EEPROM and synchronous code data.
4. Support FEM/BDC system generating key, replacing FEM/BDC control units, reset mileage.
5. Support CAS1/ CAS2/ CAS3/ CAS3+/ ISTAP/ CAS4/ CAS4+ mileage correction.
6. Support DOlP Vehicle/ Module Programming
7. Support BMW E-Sys and Rhelngold Diagnostic System.
Be able to replace the specialized devices. (Being connected via the network cable)
synchronous ELV and CAS.
8. Support getting read ISN data without disassembling the ECU (N13/ N20/ N55/ N63)
9. Support reset 8HP gearbox in F chassis.
10. Support exchange ECU and CAS.
Support BMW ECU Programming(NBT/ CIC) (Being connected via the network cable)
11. Works on All Windows computer, like win7, win8, win10.
12. Support Multi-language: English, Italian, Spanish, German, Hungarian

VVDI BIMTool Pro and VVDI BMW Tool use same software, and some functions in the software will prompt you to use bimtool.
Free Download V1.8.5 VVDI BMW Tool software

VVDI BIM Tool Functions

1. E-Series programming, coding, DTCs
1) Support autodetect car chassis
2) Support scan all car units
3) Support calculate all configuration units
4) Support read/write car configuration(FA)
5) Support input HW/ZB number to programming
6) Support calculate default coding from FA
7) Support edit detail coding information, change car config
8) Support many languages DTC code

2. F-Series programming, coding, DTCs
1) Support autodetect car chassis
2) Support read/write car configuration(FA)
3) Support calculate programming files from unit, car, whold database
4) Support calculate default coding from FA
5) Support edit detail coding information, change car config
6) Support detail special function list from coding
7) Support many languages DTC code

3. CAS1/CAS2/CAS3/CAS3+/CAS3++ISTAP OBD key learning
1) Support read key information, write key inforamtion
2) Support key learning
3) Support read/write EEPROM
4) Support read ECU/gearbox synchronize codes
5) Support write ECU/gearbox synchronize codes
6) Support synchronize ECU and CAS
7) Support synchronize CAS and ELV
8) Support read ISN via OBDII
9) Support reset KM via OBDII
10) Support disable key/enable key

4. CAS4(1L15Y)/CAS4+(5M48H) OBD key learning
1) Support read CAS encrypt key via OBDII
2) Support key learning via programmer and via ignition switch
3) Support disable key/enable key
4) Support erase key position
5) Support reset KM via OBDII
6) Support read ISN via OBDII
7) Support backup/restore coding
8) Support update original CAS4 file

5. FEM/BDC OBD key learning
1) Support read FEM/BDC encrypt key via OBDII
2) Support key learning via programmer and via ignition switch
3) Support disable key/enable key
4) Support erase key position
5) Support reset KM via OBDII
6) Support read ISN via OBDII
7) Support backup/restore coding
8) Support exchange used FEM/BDC
9) Support close/open transport mode
10) Support reset ECU lock
11) Support switch on ignition without working key

6. CAS EEPROM dump key learning
1) Support EWS1, EWS2, EWS3, EWS4, CAS1(0K50E), CAS2(2K79X), CAS3(0L01Y), CAS3+(0L15Y), CAS3++ISTAP(0L15Y, 0M23S)
2) Support prepare dealer key via programmer
3) Support disable key/enable key
4) Support read ISN from working key

7. 8HP Gearbox renew
1) Support clear ISN in 8HP gearbox
2) Support backup/restore coding
3) Support reset adaptation information

8. Read synchronize code from E-Series ECU: Support MEV9N46L, MSV70, MSS60, MS450, N62 etc

9. Read E-Series/F-Series ECU ISN via OBDII
1) Support MSV80, MSV801, MSD80, MSD81, MSD802, MSD812, MSD851
2) Support MED17xx/MVD17xx/MEVD17xx/MV1722
3) Support MED172/MEV17N46/ME17N45
4) Support MEVD172Y/MEVD172/MEVD1725/B38/X63TU

10. Support exchange ECU and CAS
1) Support write ECU ISN via OBDII
2) Support write ECU VIN via OBDII
3) Support change ECU ISN and VIN with EEPROM dump
4) Support chagne CAS1/CAS2/CAS3/CAS4 ISN and VIN with EEPROM dump

11. CAS repair(OBD&EEPROM)
1) Support repair ISTAP CAS
2) Support repair CAS EEPROM(Service mode EEPROM), you can start engine after repair the file(CAS1,CAS2,CAS3,CAS3+,CAS3++ISTAP)

12. CAS3+/CAS4+ lost all dump file support restore ISN and VIN
1) Support CAS3+(1L15Y) encrypt version
2) Support CAS3++(ISTAP) version
3) Support CAS4+(5M48H) version

13. File KM calibration
1) Support EWS1, EWS2, EWS3, EWS4
2) Support CAS1(0K50E), CAS2(2K79X), CAS3(0L01Y), CAS3+(0L15Y, 0M23S)
3) Support CAS4(1L15Y), CAS4(5M48H, 1N35H)
4) Support E-Series dashboard EEPROM(M35080)
5) Support F-Series dashboard EEPROM(35160, 35128)

14. Unlock HITAG2 key: Support lock hitag2 key made from BMW TOOL via programmer

15. EWS3/EWS4 can read EEPROM, write EEPROM via CAS PLUG

VVDI BIM TOOL Pro Using Notice:

1. Notice Do not use the Internet Port and USB Port at the same time:
For FEM/BDC Program using the USB Port connect is ok.
For Others Program you can connect the Internet Port .

2. When connect the Port with PC, first it display"Booting", after about 20 seconds it will display"BMW"
then the connect is ok

3. For Programming and coding, the best is using 14V.

Package List:
 
1pc x VVDI BMWTOOL PRO Main Unit
1pc x OBD Cable
1pc x Network Cable
1pc x USB Cable
1pc x ECU Reflash Cable
1pc x Plastic Box

Shipping Method and Delivery Time:

EU, UK , US and Russia Warehouse Shipping: 3-5 working days. Fast Delivery & Tax Free.

China Warehouse Shipping:
DHL Shipping: 3-5 working days. Usually we declare a lower value on DHL invoice to help with customs clearance. Please remember to leave message if you have any special requirement.
Yanwen Express: 7-10 working days. No Tax for European Countries.
Standard Post: 7-15 working days. To South America and Africa countries it may take 20-25 working days. Customers can tick Express Shipping Service to ship by DHL.

E-mail: sales@OBDexpress.co.uk
WhatsApp Business：+44 7418609676
WhatsApp After-sales Service: +86 18750906257
Skype: obd2express.co.uk
Facebook: https://www.facebook.com/obdexpress/
Youtube：Youtube obdexpress_uk